Seminatrice pneumatica Jet-M

La seminatrice penumatica JET-M è focalizzata sulla semplicità di utilizzo e la massima versatilità.
Compatibile con più erpici rotanti della gamma Alpego può lavorare in abbinamento con trattori da 110 a 200 Hp.


Seed-drill configurations

The maximum versatility is guaranteed by the choice between the two versions:

  • FAST: configuration with the utmost flexibility which allows a very swift uncoupling of the seed-drill (less than 10 minutes) so, as to allow the independent use of the power harrow.
  • AUTO-LEVEL: configuration for the highest precision thanks to the linkage between bar and roller, which makes it possible to keep unaltered the drilling depth, even if the working depth of the power harrow is changed.

Rubber seeding bar

The Alpego Rubber drilling element makes it possible to maintain a constant drilling depth under any soil conditions and to easily overcome possible obstacles thanks to the following strong points:


  • Silent Block: shock-absorbing system of the drilling element, which makes it possible to develop a maximum disc resistance of 60 Kg.
  • Easy to adjust: the bar is connected with the roller through a parallelogram for the adjustment of the drilling depth and it is complete with tie-rods for the adjustment of the incidence on the soil.
  • Single coulter disc: suitably slanted, with a sharp profile in order to allow a perfect penetration into the soil and a uniform rotation.
  • Following harrow: easy centralized adjustment to optimize its action in the soil.

Volumetric metering unit AIRON

Simple and practical, the new metering unit AIRON is supplied as standard with 3 interchangeable metering rollers covering a wide range of use.

Electronic seed-drilling control

Jet-M is equipped with the well-tested and reliable system of the fully electronic drilling management. Each operation is assisted by the electronic control: calibration test, management of the most complicated tramline cycles and dynamic variation of the quantity of distributed product. The driving speed is monitored by a very precise GPS system.

Low hydraulic power

The high efficiency fan permits a 20% reduction of the oil used under standard conditions, which makes it possible to use it even with tractors with a small oil capacity.

Jet-M Efficient Inside

The machine has been designed to guarantee the best compromise between performances and simplicity of use thanks to the:

  • Quick unhitching of the power harrow
  • AIRON metering unit
  • Energy efficient fan
  • Ergonomic hopper with its center of gravity moved forward
  • Electronic management of the seed-drilling control
  • Possibility of use with low-power tractors


  • Azionamento turbina con motore idraulico
  • Manometri per il controllo della pressione di mandata olio e per il controllo pressione dello scarico libero
  • Cassetto a ghigliottina per l’esclusione del dosatore
  • Griglie in rete a protezione interna
  • Sensore di livello regolabile in altezza comodamente dall’esterno
  • Coperchio in telo plastico ripiegabile
  • Dinamometro per la prova di semina
  • Vaschetta per prova di semina
  • Gestione manuale della 1/2 macchina
  • Predisposizione per fissaggi su BF - RM - RM SUPER - RK
  • Gambe di supporto per il trasporto
  • Valigetta porta attrezzi e documenti
  • Visualizzatore meccanico di inclinazione macchina e profondità di semina
  • Kit barra di semina completa di:
    - Barra di semina;
    - Doppia testa di distribuzione fissata direttamente sulla barra;
    - Pettine copriseme;
    - Tabella fanali e relativi cablaggi;
    - Pedana a gradini di accesso posteriori ripiegabili

Technical data

Mod. mm. mm. mm
Jet-M 300 3000 3000 24 125 -
Jet-M 350 3500 3500 28 125 -

Are you interested
in this product?


Hydraulic row-marking disc

The row-marking disc is a device which marks a reference line in the ground in order to make the drilling operation easier.

Kit pre-sprouting discs

The pre-sprouting discs mark the gauge of the wheel track combined with the tramline system.

Kit parking stands

Kit parking stands suited for the hitching and unhitching operations

Hydraulic bar exclusion

The shut-off of the hydraulic drill bar makes it possible to lift- and therefore – shut off the drill bar.

Disc depth control wheel

Disc depth control wheel


Central devide for the control of the Tramline with shut-off valve.

It makes it possible to use all the cycles forseen by the most popular weed-controlling and pulverization systems.