Power harrows Rotodent DKS

The ROTODENT DKS is a professional folding power harrow thanks to its TWIN-FORCE tine support with tapered roller bearings is particularly suited in combination with seed drills and it is available in the working widths 4, 4.5, 5 and 6 mt. It is ideal for tractors from 130 to 330 HP.


Features

TWIN-FORCE K transmission

The Twin-Force system consists of 2 rotors held together by a single support plate for a double sturdiness.

The quality of the Timken  taper roller bearings combined with the hardened gears guarantee the highest reliability of the transmission.

 

The power harrow with all these devices makes it possible to reach excellent performances in terms of:

 

  • A greater working depth (on average more than 100 mm. as compaired with a normal power harrow)
  • An increase of the forward speed
  • The best use of the available power
  • The greatest reliability and a minimum of maintenance



Set of forged quick replaceable tines

The quick system can be supplied separately as a set as an alternative to the traditional system, or it can be mounted directly on the machine.




Floating lateral frame

In the folding harrows the two folding halves can be made to float, thereby allowing the machine to adjust to the unevenness of the ground.

The power harrows DJ allows oscillation of the side frames only upward.




Stone guards under the gear trough

The front guards prevent rocks from entering to cause rotor damage.




Floating roller mounted on a parallelogramm

Thanks to the PARALLELOGRAM system of depth adjustment , the rear roller constantly maintains the same degree of inclination, therefore:
– The leveling bar is constantly correctly adjusted;
– In the combination with a seed-drill the pressure of the seeding coulters is kept constant




Barra niveladora de paralelogramo

The levelling bar is mounted directly on the rear roller, thereby improving the levelling quality and decreasing the power absorption.




Gearbox

By reversing the position of the changeable gears by replacing it, it is possible to have available several rotation ratios of the rotors.
This makes it possible to obtain the best possible performance of the power harrow depending on the type of soil, on the forward speed and on the required degree of crumbling.




Spacing between rotors 25 cm for a better crumbling of the soil and a reduced power absorption




Rotor phasing sequence




Combination with a seed drill

The power harrow can easily be combined with an Alpego pneumatic seed-drill.




High tensile steel frame

High tensile steel frame




Equipment

  • 1000 rpm gearbox - rotor shaft rotation at Z=30/24 (359 rpm)
  • 3 gearboxes with a multiplespeed central gearbox
  • Central drive shaft 1"3/8 Z=6
  • Lateral drive shafts with shear bolt or automatic cam clutch (to be chosen)
  • Hydraulic unlocking system
  • Rear light boards
  • 3-point hitch cat. 3 oscillating
  • Movable side plates
  • Central track eraser
  • Drop-forged tines (RAPIDO version)

Technical data

Mod. HP mm. mm. mm. (n°) (n°) Kg
Rotodent DKS-400 130-330 4000 2500 280 16 16+16 2770
Rotodent DKS-450 140-330 4500 2500 280 18 18+18 2950
Rotodent DKS-500 150-330 5000 2500 280 20 20+20 3100
Rotodent DKS-600 180-330 6000 2500 280 24 24+24 3480

Are you interested
in this product?

Options

Track eraser pair




NO-STOP Track eraser pair (2 spring)




Hydraulic depth adjustment




Hydraulic linkage for seed-drill




Hydraulic levelling bar adjustment




Kit rear pto




Cage Roller

The CAGE roller is suitable for dry soils of medium density.

With the extra kits (available only for the G5 series) it is possible to add some pipes to the cage, thereby increasing the supporting surface.

The structure of the cage does not make it suitable to support very heavy loads, such as the combined implements.




Spiral roller

The SPIRAL roller creates a soft and uniform seeding surface and is suitable for medium and light soils.

It can’t be used in the combinations with the seed drill




Spike Roller

The SPIKE roller is very versatile, it works well even when the soil is damp and compacted.

It can be used in the combinations with the seed drill




Packer Roller

The PACKER roller has a tubular structure with a large diameter: this makes it very sturdy and particularly suited for the combinations with seed drills.

Several rows of tines guarantee the traction on the ground and a series of adjustable brushes keeps each of them clean.

The result is a compact surface, perfect for sowing.




Rubber roller

The GOMMA (rubber) roller is suited for combinations with seed drills for cereals: it guarantees that the seed is placed at a constant depth.

The rubber covered surface and its large diameter decrease the clamming effect of the soil and makes it a roller suited for any work condition.




Trapeze Roller

The notched cast-iron roller ridges are spaced 12.5 cm or 15 cm depending on row spacing.With its diameter of 505 mm it combines a perfect rotation and a pressing of the seeding line.Designed for the combination can also work alone.It adapts perfectly to all types of dry or wet soil even in the presence of stones or crop residues.